Strict Standards: mktime(): You should be using the time() function instead in /home/mikrokop/public_html/includes/function.php on line 1743
MKMX America LLC • Kits • MK Basicset Okto2 - 26
font size
logo
dot Inicio Carrito Firmar/Registrarse Contacto dot
dot
print

MKMX America LLCKits

image
$2,528.75

MK Basicset Okto2 - 26

General

This is a kit to build a MK Okto2 with HiLander-26, LiPo-Holder and motor angle adapter. As a control board is a FlightCtrl ME V2.1 in the set.

Descripcion

Please note, that the length of the riggers are different, so that the shape of the MK Okto2 is a square. (about 60cm without propellers).

Powerful engine - combination: 5000mAh LiPo (4s), 10" propellers and 2827-35 Motor
With this set, more payload can be transported.


Besides the standard components, the necessary parts such as cables, shrink tubing, etc. are also included

Thus, the building is almost 'out of the box' possible.
Through the use of Roxxy engines in this set the MikroKopter is quiet and has low vibriations.
IMPORTANT: No receiver is included. Please order desired receiver separately!
Delivered products may differ from the picture - note the delivery!
The photo below shows the MK-Okto2 fully assembled (camera and camera mount not included)


Box / Kit Contents

  • 1x preassembled FlightCtrl ME V2.1 (incl. altitude sensor)
  • 8x preassembled BL-Ctrl V2.0
  • 1x- Okto Power Distribution PCB
  • 1x MKUSB
  • 1x Okto2 Frame Set with anodized (coloured) riggers
  • 4x HiLander-26
  • 1x LiPo Holder
  • Motor angle adapter
  • 1x Transparent cap (can be painted from the inside)
  • 1x Lipo 5000mAh/4s (FLAT version)
  • 8x pairs EPP1045 propeller
  • 8x Roxxy 2827-35 - black Brushless Motors
  • 1x connection cable for receiver
  • 1x extensive set of cables
  • 4x vibration dampers M3x15
  • Heat shrink tubing for other solder joints
  • 2 pieces of Velcro stripes to fasten the Lipo
  • 4 pcs Flex LED Tape for lighting
  • 100 cable ties (black)

What is missing?

  • IMPORTANT: No receiver is included. Please order desired receiver separately!
  • Transmitter
  • receiver crystal (only for 35Mhz or 40MHz receivers)
  • Lipo Charger (for example Ultramat 14 & Deans charging cable)
  • Schrauben-Sicherungslack
  • Please note the terms of the software with respect to commercial use

Useful extension

Links

Detalles

SKU
Fabricante Mikrokopter
Inventario 1 disponibles
Peso 3.0 lbs
Cantidad
add to wish

Herramientas

tell friend mail us

Reseñas

There is no comment. Why not be the first?

Average Ratings: empty starempty starempty starempty starempty star

read more Mas comentarios tuyos

smaller font normal font bigger font