MKMX America LLC • Radios y receptores
This is the Futaba 8FGHS Super 2.4GHz 14-Channel Radio no Receiver and No Servos. This is the helicopter version which will default to heli settings when powered up and has a spring loaded throttle stick. This version is Mode 2-Left Hand Throttle and Right Hand Elevator, USA Standard FEATURES: Ideal for flybarless helis and all other heli applications New software with menus that support 3-axis gyros and that are tailored to Futaba's super-fast CGT750 gyro VPP (Variable Pitch Propeller) compatibility can be set to three conditions for throttle and pitch curve Swash trim can be adjusted from swash screen Futaba's FASST (Futaba Advanced Spread Spectrum Technology) shifts very quickly virtually eliminating signal conficts and interruptions unlike other 2.4GHz systems that only stay on one or two frequencies Fourteen total transmitter channels, 12 proportional and 2 switched 20-model memory expandable to unlimited model setups and downloads of online software updates with a 32MG - 2GB SD memory card (memory card not included, must be purchased separately) R6208SB receiver accepts a wide range of batteries, from 4-cell NiCd and NiMH packs to 2S LiFe and LiPo packs with no regulator required Receiver is capable of controlling up to eight channels using the outputs for a conventional system and up to eighteen channels including the two digital channels by using the output for the S.BUS system, receiver also has a high-speed mode that delivers ultra fast frame rates on channels 1-6 SensorTouch programming Factory defined mixes Stick calibration menus Trainer system (must purchase Trainer Cord, FUTM4405) INCLUDES: 8FGHS Transmitter HT6F1700B 1700mAh NiMH Transmitter Battery, FUTM1480 HBC-2B(4) Battery Charger, FUTM1805 Switch Harness Neck Strap Instruction Manual REQUIRES: Servos such as the Futaba S9252, S9255, S3151 and S3001 SPECS: Transmitter; Transmitting Frequency: 2.4GHz band Modulation: 2.4GHz 7ch or 2.4G multi-channel switchable Power Supply: 7.2V HT6F1700B NiMH Battery R6208SB Receiver; Power Requirement: 3.7 - 7.4V battery or regulated output from ESC* Size: 0.98 x 1.86 x 0.56" (24.9 x 47.3 x 14.3mm) Weight: 0.49oz (13.8g) *When using ESCs make sure that the regulated output capacity meets your usage application
There is no comment. Why not be the first?
Mas comentarios tuyos